Description
Specifications
- Mfr Part Number: TVS-1282T-I7-32G-US
- Hardware:
- CPU: Intel Core i7-6700 Processor (3.4GHz, Quad-Core)
- Memory: 32GB (4x 8G) DDR4 RAM
- Flash Memory: 512 MB DOM
- M.2 Slot: 2x M.2 2242/2260/2280/22110 SATA 6Gb/s SSDÂ (The M.2 SSD is not included as standard)
- Hard Drive Tray: 4x 2.5″ SSD, 8x 2.5″ or 3.5″ Hard Drive or SSD
- Drive Interface: SATA 6Gbps/3Gbps; Hot-swappable
- Thunderbolt Port: 2x Thunderbolt 2 High-speed Ports
- USB: 5x USB 3.0 Ports (4 rear, 1 front)
- LAN Port: 2x 10GBase-T Ports, 4x Gigabit Ports
- Slot: 1x PCI-Express 3.0 x8 Slot, 2x PCI-Express 3.0 x4 Slots
- HDMI: 3 (2x HDMI 1.4b, 1x HDMI 2.0)
- Audio Input: Audio In – 2 x 6.3mm MIC In
- Audio Output: 2x built-in speaker, 1x 3.5mm Line-out jack (Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker)
- LED Indicators: System Status, 2.5″ SSD, M.2 SSD, 3.5″ HDD
- Buttons: System – Power, Reset, USB one-touch-backup
- System Warning: Buzzer
- Sound Level: Sound pressure (LpAm) (by stander positions) – 21.6 dB (with 8 x Seagate ST2000VN000-1HJ164 hard drive installed)
- Operating System: QTS 4.2 (Embedded Linux)
- Networking:
- TCP/IP (IPv4 & IPv6 -Â Dual Stack)
- Quad Gigabit NICs with jumbo frame (failover, multi-IP settings, port trunking/NIC teaming)
- Service Binding based on Network Interfaces
- Squid Proxy server
- Proxy client
- DHCP client, DHCP server
- Protocols – CIFS/SMB, AFP (v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, and SMSC
- UPnP & Bonjour Discovery
- USB Wi-Fi Adapter Support
- Security:
- Network access protection with auto-blocking – SSH, Telnet, HTTP(S), FTP, CIFS/SMB, AFP
- CIFS host access control for shared folders
- FIPS 140-2 validated AES 256-bit volume-based and shared folder data encryption
- AES 256-bit external drive encryption
- Importable SSL certificates
- Instant alerts via email, SMS, beep, push service, and LCD panel
- 2-step verification
- Storage Management:
- Storage Space Utilization monitoring
- QNAP flexible Volume/LUN with thin provisioning and space reclaim
- Disk volume types – RAID 0, 1, 5, 6, 10, + hot spare, JBOD single
- Supports storage pools
- Supports Qtier Technology (Auto Tiering, 8GB System RAM and SSD drives are required)
- Supports snapshots (4GB System RAM required)
- Supports Volume/LUN snapshot
- Snapshot manager
- Snapshot clone
- Snapshot vault
- Snapshot replica
- Snapshot agent for Microsoft Windows and VMware vSphere
- Online Volume Expansion
- Online storage pool expansion
- Online RAID capacity expansion and online RAID level migration
- SMART data migration
- Storage expansion via QNAP TX-500P/UX-800P expansion units
- JBOD enclosure roaming
- SSD read-only/read-write cache
- Bad block scan and hard drive S.M.A.R.T.
- Bad block recovery & RAID recovery
- Bitmap support
- File System:
- Internal HDD: EXT4
- External HDD: EXT3, EXT4, NTFS, FAT32, HFS+
- Backup Station:
- Remote replication server (over rsync)
- Real-time remote replication (RTRR) to another QNAP NAS, FTP or CIFS/SMB server
- Works as both RTRR server & client with bandwidth control
- Real-time & scheduled backup
- Backup versioning for RTRR
- Snapshot support for RTRR/Rsync
- Encryption, compression, file filter, and transfer rate limitation
- Desktop backup with QNAP NetBak Replicator for Windows
- Apple Time Machine backup support
- Data backup to multiple external storage devices
- Third party backup software support: Veeam backup & replication, Acronis True Image, Arcserve backup, EMC retrospect, Symantec Backup Exec, etc.
- Form Factor: Tower
- Fan: System – 3x 8cm Cooling Fans; CPU – 1x 9cm Fan
- Power Supply:
- Input: 100-240V~, 3-1.5A, 60-50Hz
- Output: 250W
- Dimensions (WxDxH): 14.56 x 12.59 x 9.23 inch / 369.9 x 319.8 x 234.6 mm
- Weight: 25.46 lbs / 11.55 kg
