Description
Specifications
- Mfr Part Number: DGS-1210-28MP
- Ports: 24x 10/100/1000 Ports, 4x COMBO Ports (10/100/1000 or 100/1000 SFP)
- Port Standards & Functions:
- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)
- IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.3x Flow Control
- IEEE 802.3af/at compliance (for PoE ports on PoE models)
- Network Cables: UTP Cat. 5, Cat. 5e (100 m max.)
- Duplex Mode: Full/half-duplex for 10/100 Mbps; Full-duplex for 1000 Mbps
- Media Interface Exchange: Auto MDI/MDIX adjustment for all twisted-pair ports
- Performance:
- Switching Capacity: 56 Gbps
- Transmission Method: Store-and-forward
- MAC Address Table: 8K entries
- Static MAC Addresses: 256 entries
- Max. 64 Byte Packet Fwd Rate: 41.7 Mpps
- Packet Buffer Memory: 4.1 Mbits
- CPU Memory: 128 MB DDR3
- Flash Memory: 32 MB
- Power Over Ethernet:
- PoE Standard: 802.3af (PoE) and 802.3at (PoE+)
- PoE Capable Ports: Ports 1 – 24 (PoE+)
- PoE Power Budget: 370W
- Software:
- L2 Features:
- MAC Address Table – 8K entries
- IGMP Snooping – IGMP v1/v2 Snooping; IGMP v3 awareness; Supports 256 IGMP groups; Supports at least 64 static multicast addresses; IGMP per VLAN; Supports IGMP Snooping Querier
- Loopback Detection
- 802.3ad Link Aggregation – Maximum of 8 groups/8 ports per group
- LLDP
- LLDP-MED
- Jumbo Frame – Up to 10,000 bytes
- Spanning Tree Protocol – 802.1D STP; 802.1W RSTP; 802.1s MSTP
- Flow Control – 802.3x Flow Control; HOL Blocking Prevention
- Port Mirroring – One-to-One; Many-to-One; Supports Mirroring for Tx/Rx/Both
- Multicast Filtering – Forwards all unregistered groups; Filters all unregistered groups
- Configurable MDI/MDIX
- MLD snooping v1/v2 (256 groups)
- VLAN:
- 802.1Q
- VLAN Group – Max. 256 static VLAN groups
- Configurable VID from 1 – 4094
- Asymmetric VLAN
- Auto Voice VLAN – Max. 10 user-defined OUI; Max. 8 default OUI
- Auto Surveillance VLAN
- Quality of Service (QoS):
- 802.1p Quality of Service
- 8 queues per port
- Queue Handling – Strict; Weighted Round Robin (WRR)
- Bandwidth Control – Port-based (ingress/egress, min granularity 10/100/1000 is 16 Kbps)
- QoS based on – 802.1p priority queues; DSCP; MAC address; EtherType; IP address; Protocol type; ToS; IP preference; IPv6 Traffic Class; TCP/UDP port
- L3 Features:
- IP interface – Supports 4 interfaces
- IPv6 Neighbor Discovery (ND)
- Static routing – 124 IPv4 static route entries; 50 IPv6 static route entries
- Access Control List (ACL):
- Max. 50 access lists
- Max. 768 rules shared by IPv4, MAC, and IPv6
- Each rule can only be associated with a single port
- ACL based on – MAC address – 802.1p priority mask, VID mask, Source/destination MAC address mask, EtherType mask; IP address – Source/destination IP address mask, DSCP mask, Protocol type mask, TCP/UDP port number mask; IPv6 address – Source/destination IP address mask, DSCP mask, Protocol type mask, TCP/UDP port number mask, IPv6 traffic class mask
- Security:
- ​Broadcast/Multicast/Unicast Storm Control
- D-Link Safeguard Engine
- Traffic segmentation
- SSH v2
- TLS v1.0
- DoS attack prevention
- 802.1X Port-based Access Control
- Port Security – Supports up to 64 MAC addresses per port
- ARP Spoofing Prevention – Max. 127 entries
- DHCP Server Screening
- IP-MAC-Port Binding (Smart Binding) – ARP Inspection – Max. 256 entries; IPv4 Inspection – Max. 127 entries; IPv6 Inspection – Max. 63 entries; DHCP Snooping – Max. 512 entries
- Management:
- Web-based GUI
- D-Link Network Assistant Utility
- Compact CLI
- Telnet Server
- TFTP Client
- Configurable MDI/MDIX
- SNMP – Supports v1/v2c/v3
- SNMP Trap
- Backup/Upgrade firmware
- Smart Wizard
- Upload/Download Configuration file
- System Log – Max. 500 log entries
- BootP/DHCP Client
- SNTP
- ICMP v6
- IPv4/v6 Dual Stack
- DHCP Auto Configuration
- Time Setting – SNTP
- RMONv1
- Trusted Host
- Dual Image
- Dual configuration
- L2 Features:
- AC Input: 100 – 240 VAC; 50/60 Hz Internal Universal Power Supply
- Power Consumption:​
- PoE enabled: 446.1W/100V; 424.8W/240V (Max)
- PoE off: 29.8W / 100V; 9.0W / 240V (Max)
- Standby: 18.5 W/100V; 7.1W/240V
- Fans: 2
- Acoustics: High speed – 51.7 dB(A); Low speed – 44.9 dB(A)
- Heat Dissipation: 1521.99 BTU/hr (100 V); 1449.49 BTU/hr (240 V)
- LEDs:
- Power per device
- Console per device
- Link/Activity/Speed per port
- PWR Max
- Fan Error
- MTBF: 277,967 hours
- EMI Certifications: CE Class A, VCCI Class A, FCC Class A, BSMI, CCC
- Safety Certifications: CB, UL, BSMI, CCC
- Dimensions (WxDxH): 17.30 x 9.80 x 1.73 inch / 440.0 x 250.0 x 44.0 mm
- Weight: 8.7 lbs / 3.94 kg